Basic Info.
Model NO.
FTKS-1805-24A1
APC Return Loss
More Than 60dB
Insert and Pull out Life
More Than 1000 Times
Dimension
292mm*218mm*83mm
Installation Dimension
154mm*82mm
Warranty
10 Years
Transport Package
Plastic Bag+Standard Carton
Specification
292mm*218mm*83mm
Trademark
TAKFLY/OEM
Origin
Shenzhen, China
Production Capacity
500, 0000
Product Description
FTTX 24 Fibre Termination Box with 2 input and 24 output cable holes
1.Product Description
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2.Features
1.Total enclosed structure;
2.Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65;
3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one;
4.Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC/LC/PLC adaptor installation, easy maintenance;
5.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation;
6.Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses;
3.Specification
1. Environmental requirement
Working temperature:-40ºC~+85ºC;
Relative humidity≤85%(+30ºC);
Atmospheric pressure:70KPa~106Kpa;
2. Main technical datasheet
Insertion loss≤0.2dB;
UPC return loss≥50dB;
APC return loss≥60dB;
Life of insertion and extraction>1000 times;
3. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than 2MΩ/500V(DC);IR≥2MΩ/500V;
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover;U≥3000V;
4.Configuration table
Table 1 Model and configuration
5.Product cable ways
1.Cover;
2.Base;
3.Lock;
4.Water-proof cable gland;
5.Main cable fixer;
6.Main cable force fixer;
7.Adaptor;
8.Adaptor Bracket;
9.Dust-free blocker;
10.flap plate;
11.heat protector Pic 3 Cable ways
6.Installation
1.Wall-mounted installation;
Drill 4 holes over the wall based on the size in table 1,place the expansion bolt Φ7.5*40,place the box to match up the holes and use bolt to fasten;
2.Pole-mounted installation;
Fix 1 set of the easy pole ring to the telecom pole;
7.Accessories
1. Users' Manual*1;
2. Key*1;
3. Accessories Bag * 1;
4. Easy pole ring*2.(Option);
8.Application
1.Telecommunication subscriber loop;
2.FTTH/FTTX/LAN/WAN;
9.Item and company images:
10.Company Information
Takfly, established in 2000, has been manufacturing and exporting fiber cable, adapter, attenuator, connector, coupler, splitter, termination box, ODF, fiber instruments, media conceiver, switch, optical module, CWDM/DWDM, etc. Takfly's products have passed the management verification: ISO14001: 2004. and goods have passed RoHS, CE, FCC, REACH, EN50575, ISO9001, etc.
So far, Our products have been widely installed in many big worldwide project and work perfectly. Many project contactors ask the first and second operators to purchase fiber items from Takfly for their new project. In addition, we also have builted long term cooperation with Lapp, Amper, Telefonica, orange and Ericsson. All enquiry are warmly welcomed here no matter it's small or big, we promise to provide all customers high quality and good price item.
11.Why choose Takfly?
Service
1.Customer's logo: Acceptable;
2.General inspection on fixing before packing;
3.Third party inspection: Acceptable;
Quality Control
All products must go through five checks before manufacturing process;
1.Material incoming inspection before production;
2.Full check after every individual process finished;
3.Full check after production half-done;
4.Full check before packing;
5.Spots check after production packed before shipping;
Advantage
1.15 years experience in manufacturing fiber optic products;
2.Availability of R & D with more than 10 engineers;
3.Available of design and making mold with special molding house;
4.High quality, attractive price and fast delivery(2-7days);
5.OEM, ODM customer designs are also welcomed;
6.More than 200 workers;
7.Excellent service;
Delivery
1.Packing: Plastic bag& carton, Neutral packing or as your required;
2.Sample time: 1-3 days after confirm;
3.Order lead time: 2-7working days depend on quantity and products;
4.Shipping port: Shenzhen China or HK;
5.Shipping term: EXW or FOB;
Shipping
1.Once confirmed the order, and payment sent after finishing goods;
2.Goods will be sent within 7 days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc;
3.Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility;
4.Please do not bid if you disagree with the shipping and handling charge;
Pls kindly note we not only wanna to seek an opportunity to work with you, but also regard you as our friend. All inquiries from your side will be warmly welcomed here. You can call at 0086 13537892205 to reach me.
1.Product Description
The equipment is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building.
2.Features
1.Total enclosed structure;
2.Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging, protection level up to IP65;
3.Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one;
4.Cable,pigtails,patch cords are running through own path without disturbing each other, cassette type SC/LC/PLC adaptor installation, easy maintenance;
5.Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation;
6.Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses;
3.Specification
1. Environmental requirement
Working temperature:-40ºC~+85ºC;
Relative humidity≤85%(+30ºC);
Atmospheric pressure:70KPa~106Kpa;
2. Main technical datasheet
Insertion loss≤0.2dB;
UPC return loss≥50dB;
APC return loss≥60dB;
Life of insertion and extraction>1000 times;
3. Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than 2MΩ/500V(DC);IR≥2MΩ/500V;
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover;U≥3000V;
4.Configuration table
Table 1 Model and configuration
Model | Description | Size(Pic 1) | Max Capacity | Installation Size(Pic 2) | Cable Enty | ||
A*B*C(mm) | SC | LC | PLC | D*E (mm) | |||
FTKS-1805-24F | Splitter Box | 300*222*73 | 16 | 32 | 32(LC) | 157.5*82 | Express/not Express |
5.Product cable ways
1.Cover;
2.Base;
3.Lock;
4.Water-proof cable gland;
5.Main cable fixer;
6.Main cable force fixer;
7.Adaptor;
8.Adaptor Bracket;
9.Dust-free blocker;
10.flap plate;
11.heat protector Pic 3 Cable ways
6.Installation
1.Wall-mounted installation;
Drill 4 holes over the wall based on the size in table 1,place the expansion bolt Φ7.5*40,place the box to match up the holes and use bolt to fasten;
2.Pole-mounted installation;
Fix 1 set of the easy pole ring to the telecom pole;
7.Accessories
1. Users' Manual*1;
2. Key*1;
3. Accessories Bag * 1;
4. Easy pole ring*2.(Option);
8.Application
1.Telecommunication subscriber loop;
2.FTTH/FTTX/LAN/WAN;
9.Item and company images:
10.Company Information
Takfly, established in 2000, has been manufacturing and exporting fiber cable, adapter, attenuator, connector, coupler, splitter, termination box, ODF, fiber instruments, media conceiver, switch, optical module, CWDM/DWDM, etc. Takfly's products have passed the management verification: ISO14001: 2004. and goods have passed RoHS, CE, FCC, REACH, EN50575, ISO9001, etc.
So far, Our products have been widely installed in many big worldwide project and work perfectly. Many project contactors ask the first and second operators to purchase fiber items from Takfly for their new project. In addition, we also have builted long term cooperation with Lapp, Amper, Telefonica, orange and Ericsson. All enquiry are warmly welcomed here no matter it's small or big, we promise to provide all customers high quality and good price item.
11.Why choose Takfly?
Service
1.Customer's logo: Acceptable;
2.General inspection on fixing before packing;
3.Third party inspection: Acceptable;
Quality Control
All products must go through five checks before manufacturing process;
1.Material incoming inspection before production;
2.Full check after every individual process finished;
3.Full check after production half-done;
4.Full check before packing;
5.Spots check after production packed before shipping;
Advantage
1.15 years experience in manufacturing fiber optic products;
2.Availability of R & D with more than 10 engineers;
3.Available of design and making mold with special molding house;
4.High quality, attractive price and fast delivery(2-7days);
5.OEM, ODM customer designs are also welcomed;
6.More than 200 workers;
7.Excellent service;
Delivery
1.Packing: Plastic bag& carton, Neutral packing or as your required;
2.Sample time: 1-3 days after confirm;
3.Order lead time: 2-7working days depend on quantity and products;
4.Shipping port: Shenzhen China or HK;
5.Shipping term: EXW or FOB;
Shipping
1.Once confirmed the order, and payment sent after finishing goods;
2.Goods will be sent within 7 days with the fast, reasonable and efficient shipping mode such as DHL, EMS, UPS,FEDEX, TNT, etc;
3.Please make sure your postal address is correct. Any lost and mistakes because of wrong address are not supplier's responsibility;
4.Please do not bid if you disagree with the shipping and handling charge;
Pls kindly note we not only wanna to seek an opportunity to work with you, but also regard you as our friend. All inquiries from your side will be warmly welcomed here. You can call at 0086 13537892205 to reach me.